Woodeedoo Clear Floor Varnish
Finishes: Matt / Gloss
Woodeedoo clear floor varnish protects the surface of all interior wood. Offers a quick drying time of about 20 minutes. Highly resistant to wear, scuff, marks and scratches.
A perfect sealer for previously treated surfaces with water-based wood stain/dye.
Coverage: 10-12 sqm per litre (first coat); 15-18 sqm per litre (second & third coat); efficiency depends on the type of wood and the application method.
No of coats: minimum coats 2, recommended 3
Drying time: 20 minutes, ready for second coat in two hours
Features:
• Clear, on-yellowing matt finish
• suitable for both softwoods and hardwoods
• high protection against scratches, spills, scuffs, and marks
• nourishes the grain pattern
• indoor use
• non-toxic
• safe & eco-friendly (does not contain harmful substances)
• easy to apply
• a low odour that lasts up to several days until complete evaporation
Recommended for varnishing the following wooden products:
• floors
• stairs
• windowsills
• other wooden elements
How to use:
• Shake well before use. Do not dilute.
• Ensure the wooden surfaces are clean, dry, dust and resins-free. It is best to apply on wood without previous primers. Previous coats of paint or varnish must be removed back to bare wood.
• The temperature of the substrate, environment and coloured elements during the work should be between +5 ºC and +25 ºC.
• The varnish should be applied in thin layers with a brush or roller, rubbing the preparation evenly along the wood grain over the largest possible surface. Wipe off any excess with a clean, lint-free cloth.
• Before applying the final coat, the varnished surface should be slightly matted with sandpaper (paper gradation 220 - 240). Total curing time approx. 3 - 5 days (depending on ambient conditions).
• Warranty: 12 months (in sealed containers)